Caractéristiques détaillées:

I-8431-80 embedded controller

Introduction

The I-8431/ I-8831 are Ethernet embedded controller with 4/8 I/O slots. Both are equipped with MiniOS7,an embedded OS similar to DOS that is developed by ICPDAS Co., LTD.

The MiniOS7 can boot up in a very short time (0.4~0.8 second). It has built-in hardware diagnostic function, and supports the full functions to access all 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, Counter/Frequency, motion modules etc.

To simplify the TCP/IP program developing process, we designed a XServer architecture. It is a reliable, opened, expandable, all purposed,and easily to be used library. The Xserver implements 90% functionalities of Ethernet communication. Refer the rich demo programs we provided, software engineer can easily finish the 10% remaining funtionalities and greatly shorten the developing time.!@!@

The I-8431/I-8831 can be used in remote data acquisition and control applications, including environment monitoring, power management and factory automation.

Features

• Equipped with MiniOS7, ,an embedded OS similar to DOS that is developed by ICP DAS Co., LTD.
• Support IPv4.
• Provides full C library functions such as 8K, 87K I/O, 7-segment LED, RTC (real time clock), EEPROM etc.
• Firmware can be updated via the RS-232 port.
• The XServer architecture greatly simplify the programming of TCP/IP protocol.
• Supports the VxComm technique for all ports (RS-232 and Ethernet).
• Provides a hardware serial number or an ASICKey to protect designated systems.
• Compact I/O Expansion slot allows the quick installation of I/O modules.
• The built-in watchdog circuit will reset the CPU module if a failure occurs in either the hardware or software, allowing the controller system more reliable and stable in harsh and noisy environments.
• Dual Bus designed to support i-8K and i-87K series I/O modules, such as DI/DO, AI/AO, Counter/Frequency modules.
• Ventilated housing designed to operate between !V25￠XC to +75￠XC.
• Using DIN rail clips or Screw poles around the corners allows the control unit to be easily mounted on the control box.

Specifications

• CPU: 80186 or compatible (16-bit and 80MHz)
• SRAM: 512KBytes
• Flash ROM : 512KBytes
• EEPROM: 2KBytes
• Built-in Watchdog Timer
• 64-bit hardware unique serial numbe
• Real time clock
• NVRAM : 31Byte
• Ethernet port : 10BaseT NE2000 compatible
• COM1: RS-232 (to update firmware)
• COM0 : for internal communication with the 87K
  modules connected to the slots
• COM3: RS-232/485
• COM4: RS-232
• SMMI (small man machine interface)
  5-digits LED display
  4 LED indicators
  4 push buttons
• I/O expansion slots:
  I-8431 : 4 slots
• I-8831 : 8 slots

Power

• Power reverse polarity protection
• Power supply: 20W
• Power requirement: 10 ~ 30 V/DC
• Power consumption:
  I-8431 : 3.9 W
  I-8831 : 5.1 W

Dimensions

• 230 x 110 x 75.5 mm (for 4-Slots)
• 354 x 110 x 75.5 mm (for 8-Slots)