16-Bit Contact Monitoring Digital Input Module Feature:16 inputs Direct contact monitoring Low cost Description & Specifications:Input bits: 16 Logic levels: LOW contact closed to ground, or < 2VDC HIGH contact open or +4 to 30 VDC Effective distance: 500 meters Power consumption: 0.8 W Operating temp: 14ºF to 158ºF Storage temp: -13ºF to 185ºF Humidity: 5% to 95%, non-condensing

4 Relay Output Module (2 Form A NO, 2 Form C) with 1 Digital Input Feature:4 isolated inputs w/common ground 4 Relays (2 Form C 2 Form A NO) 0.6A @125 VAC 2A @ 30 VDC Description & Specifications:Digital Inputs Channels: 4 isolated but share common gnd Logic level 0: +1V max. Logic level 1: +3.5 to 30V Isolation voltage: 3750Vrms Input impedance: 3K ohm, 0.5W max Relay outputs Channels: 4, 2 Form A (spst) NO, 2 Form C (spdt) Contact ratings: AC: 125V @0.6A; 250V @0.3A DC: 30V @2A; 110V @0.6A Breakdown V: 500VAC (50/60Hz)

3 Channel Relay Output Module with 8 Digital Inputs Features: 8 isolated inputs w/common ground Relays (Form A) 5A @ 250 VAC 5A @ 30 VDC Description & Specifications: Digital Inputs Channels: 8 isolated but share common gnd Logic level 0: +1V max. Logic level 1: +3.5 to 30V Isolation voltage: 3750Vrms Input impedance: 3K ohm, 0.5W max Relay outputs Channels: 3 (dry contact) 2 Form A (spst) NO Contact ratings: AC: 125V @ 5A DC: 30V @ 5A Breakdown V: 500VAC (50/60Hz)

7 Relay Output Module (all Form A NO) Feature:7 relay outputs Form A (spst) N.O. 0.5A @ 120 VAC 1A @ 24 VDC Description & Specifications:Relays: 7 Configuration: Form “A” relay SPST N.O. Contact type: Dry Contact ratings: AC 120V@0.5A, DC 24V@1A Surge strength: 1500VAC Relay on time(typical): 5 ms Power consumption: 0.8W Operating temp: 14ºF to 158ºF Storage temp: -13ºF to 185ºF Humidity: 5% to 95%, non-condensing

2 Channel 32-Bit Counter/Frequency Input Module Feature:2 indepenent 32-bit counters 100 KHz input freq. 1 digital input bit 2 digital output bits CB-7080 Specification:Counters: 2 independent Counter depth: 32 bits Input frequency: 100KHz max. Input mode: Isolated or non-isolated Isolation input levels: Logic level 0: +1V max., Logic level 1: +3.5 to 30V Isolation voltage: 5000Vrms Non-Isolated input level are programmable Programmable Threshold voltage: Logic level 0: from 0 to +5V, Logic level 1: from0 to +5V Input pulse width: 10us min Programmable digital noise filter: 8 us to 262 ms Frequency Measurement Range: 1 to 100 KHz Programmable built-in gate time: 1.0/0.1sec Digital Input Channels: 1 Logic 0: 0 to 1V Logic 1: 3.5V to 30V Digital Output Channels: 2 Open collector to 30V, 30mA load max. Display LED: 5 digit (I-7080D) monitor either CH0 or CH1 Power consumption: 2 W

Pre Wired, Multi-Module Evaluation Kit , 120VAC powered Description:Prewired, ready to connect I/O system. The system includes one CB-7012D voltage/current input module w/display, one CB-7060 digital I/O module, one CB-7021 analog output module, one CB-7520 RS-232 to RS-485 converter, the CB-NAP-7000S software package, a DB-9 to DB-9 cable and power supply. Specify /AC110 for 120VAC power or /AC220 for 200 VAC power versions.

Pre Wired, Multi-Module Evaluation Kit , 220VAC powered Description:Prewired, ready to connect I/O system. The system includes one CB-7012D voltage/current input module w/display, one CB-7060 digital I/O module, one CB-7021 analog output module, one CB-7520 RS-232 to RS-485 converter, the CB-NAP-7000S software package, a DB-9 to DB-9 cable and power supply. Specify /AC110 for 120VAC power or /AC220 for 200 VAC power versions.

Isolated RS-422/RS485 & Non-isolated RS-232 Multi-Serial Card PCI Bus COM3/COM4 : RS-422/RS-485 Support RS-422/RS-485, 921.6K communication speed, non-isolated, self-tuner inside Plug & Play driver, supports COM3 & COM4