200KS/s 12-bit 32-Channel Isolated Analog Input Board 14 bit 8 Channel Isolated Analog Output Board 12 bit 200KS/s sampling rate , 32 Channel Isolated Analog Input Board (High Gain) FEATURES: 32 single-ended or 16 differential input channels 500VDC photo-isolation protection Maximum 200K 12-bit sampling rate Built-in 1K byte FIFO Single -ended or differential input, can be jumper selectable Auto-channel / gain scan Command set programming Gap-free A/D conversion SPECIFICATIONS: General Environment Power Requirements: +5V @850mA max. Operating temp 0° - 50°C Storage temp -20°C - 70°C Humidity 0 to 90% non-condensing Dimensions 173 mm x 122 mm

200KS/s 12-bit 32-Channel Isolated Analog Input Board ISO-AD32L with DN-37 12 bit 200KS/s sampling rate , 32 Channel Isolated Analog Input Board (Low Gain) FEATURES: 32 single-ended or 16 differential input channels, 500VDC photo-isolation protection Maximum 200K 12-bit sampling rate Built-in 1K byte FIFO Single -ended or differential input, can be jumper selectable Auto-channel / gain scan Command set programming Gap-free A/D conversion SPECIFICATIONS: General Environment Power Requirements: +5V @ 850mA max. Operating Tempperature: 0° - 50°C Storage Temperature: -20°C - 70°C Humidity 0 to 90% non-condensing Dimensions 173 mm x 122 mm

14 bit 8 Channel Isolated Analog Output Board FEATURES: AT bus 500VDC photo-isolation protection 8/16 channel, 12-bit analog output Build in FIFO for continuous throughput Maximum 100KHz , 12 bit voltage output Unipolar or bipolar outputs available from each converter Voltage/ current outputs from each converter Output Type ( Unipolar or Bipolar ) and output range ( 0~5v,+/- 5V,0~10V,+/- 10V) can be jumper selectable 4-20mA current sink to ground from each converter On board reference of -10 V or -5V ( jumper selectable) Double-buffered D/A latches with simultaneous update for each 4 channel group (channels: 0-3,4-7,8-11,12-15) Command set programming Software Calibration SPECIFICATIONS: Voltage Output Range Unipolar 0~5V or 0~10V Bipolar +/-10Vor,+/- 5V Current drive +/-5mA Absolute accuracy 0.01% FSR typical Power on state 0V bipolar ; 5V unipolar Current Output Range Current output 0-20mA or 4-20mA Absolute Accuracy 0.1% FSR typical Excitation voltage range + 7 V to +40V Power On state 4mA bipolar , 12mA Unipolar Stability Offset temperature coefficient +/- 50mV/ deg C Gain temperature coefficient +/- 10ppm (C) General Environmental Power Requirements: ISO-DA8 +5VDC @800mA max. ISO-DA16+5VDC @1400mA max. Operating temp 0-50 deg/ C Storage temp -20 to 70 deg/C Humidity 0 to 90% non-condensing Dimensions 182 mm x 122 mm"

14 bit 16 Channel Isolated Analog Output Board SPECIFICATIONS: AT bus 500VDC photo-isolation protection 8/16 channel, 12-bit analog output Build in FIFO for continuous throughput Maximum 100KHz , 12 bit voltage output Unipolar or bipolar outputs available from each converter Voltage/ current outputs from each converter Output Type ( Unipolar or Bipolar ) and output range ( 0~5v,+/- 5V,0~10V,+/- 10V) can be jumper selectable 4-20mA current sink to ground from each converter On board reference of -10 V or -5V ( jumper selectable) Double-buffered D/A latches with simultaneous update for each 4 channel group (channels: 0-3,4-7,8-11,12-15) Command set programming Software Calibration FEATURES: Voltage Output Range Unipolar 0~5V or 0~10V Bipolar +/-10Vor,+/- 5V Current drive +/-5mA Absolute accuracy 0.01% FSR typical Power on state 0V bipolar ; 5V unipolar Current Output Range Current output 0-20mA or 4-20mA Absolute Accuracy 0.1% FSR typical Excitation voltage range + 7 V to +40V Power On state 4mA bipolar , 12mA Unipolar Stability Offset temperature coefficient +/- 50mV/ deg C Gain temperature coefficient +/- 10ppm (C) General Environmental Power Requirements: ISO-DA8 +5VDC @800mA max. ISO-DA16+5VDC @1400mA max. Operating temp 0-50 deg/ C Storage temp -20 to 70 deg/C Humidity 0 to 90% non-condensing Dimensions 182 mm x 122 mm"

14-bit 16/8/4 Channel Analog Output Boards FEATURES: PCI bus 16/8/4 channels, 14-bits analog output Unipolar or bipolar outputs available from each converter v Output type (Unipolar or bipolar) and output range ( 0~5V, ±5V, 0~10V, ±10V) can be software programmable 4~20mA or 0~20mA current sink to ground for each converter Two pacer timer interrupt source Double-buffered D/A latches Software calibration 16 channels DI, 16 channels DO SMD, short card. One D-Sub connector, two 20-pin flat cable connectors Connects directly to DB-16P, DB-16R, DB-24C, DB-24PR and DB-24POR Automatically detected by Windows 95/98/NT No base address or IRQ jumper needs to be set SPECIFICATIONS: Digital Inputs/Outputs All inputs/outputs are TTL compatible Logic high Voltage VIH: 2.4V(Min.) Logic low Voltage VIL: 0.8V(Max.) Sink current IOL: 8mA(Max.) Source current IOH: 0.4mA(Max.) Environment Operating Temp.: 0~60deg /C Storage Temp.: -20~80 deg/C Humidity : 0~90% non-condensing Dimension: 180 mm x 115mm Power Consumption PIO-DA4: +5VDC @ 600mA PIO-DA8: +5VDC @ 800mA PIO-DA16: +5VDC @ 1400mA"

14-bit 16/8/4 Channel Analog Output Boards FEATURES: PCI bus 16/8/4 channels, 14-bits analog output Unipolar or bipolar outputs available from each converter v Output type (Unipolar or bipolar) and output range ( 0~5V, ±5V, 0~10V, ±10V) can be software programmable 4~20mA or 0~20mA current sink to ground for each converter Two pacer timer interrupt source Double-buffered D/A latches Software calibration 16 channels DI, 16 channels DO SMD, short card. One D-Sub connector, two 20-pin flat cable connectors Connects directly to DB-16P, DB-16R, DB-24C, DB-24PR and DB-24POR Automatically detected by Windows 95/98/NT No base address or IRQ jumper needs to be set SPECIFICATIONS: Digital Inputs/Outputs All inputs/outputs are TTL compatible Logic high Voltage VIH: 2.4V(Min.) Logic low Voltage VIL: 0.8V(Max.) Sink current IOL: 8mA(Max.) Source current IOH: 0.4mA(Max.) Environment Operating Temp.: 0~60deg /C Storage Temp.: -20~80 deg/C Humidity : 0~90% non-condensing Dimension: 180 mm x 115mm Power Consumption PIO-DA4: +5VDC @ 600mA PIO-DA8: +5VDC @ 800mA PIO-DA16: +5VDC @ 1400mA"

14-bit 16/8/4 Channel Analog Output Boards PIO-DA16 with DN-37 FEATURES: PCI bus 16/8/4 channels, 14-bits analog output Unipolar or bipolar outputs available from each converter v Output type (Unipolar or bipolar) and output range ( 0~5V, ±5V, 0~10V, ±10V) can be software programmable 4~20mA or 0~20mA current sink to ground for each converter Two pacer timer interrupt source Double-buffered D/A latches Software calibration 16 channels DI, 16 channels DO SMD, short card. One D-Sub connector, two 20-pin flat cable connectors Connects directly to DB-16P, DB-16R, DB-24C, DB-24PR and DB-24POR Automatically detected by Windows 95/98/NT No base address or IRQ jumper needs to be set SPECIFICATIONS: Digital Inputs/Outputs All inputs/outputs are TTL compatible Logic high Voltage VIH: 2.4V(Min.) Logic low Voltage VIL: 0.8V(Max.) Sink current IOL: 8mA(Max.) Source current IOH: 0.4mA(Max.) Environment Operating Temp.: 0~60deg /C Storage Temp.: -20~80 deg/C Humidity : 0~90% non-condensing Dimension: 180 mm x 115mm Power Consumption PIO-DA4: +5VDC @ 600mA PIO-DA8: +5VDC @ 800mA PIO-DA16: +5VDC @ 1400mA"

32-Channel Single-Ended Isolated Analog Input Board FEATURES: PCI Bus 32 single-ended analog input channels 12-bit A/D converter ( ADS 774 or equivalent) 3,000Vdc photo-isolation protection v Analog input range Bipolar: +/-10V,+/-5 V, +/-2.5V, +/-1.25V, +/-0.625V Unipolar: 0-10V, 0-5V, 0-2.5V, 0-1.25V Programmable gain control 3000V DC/DC converter built-in A/D trigger mode: Software Trigger A/D data transfer mode : polling SPECIFICATIONS: Channels : 32 single-ended Resolution : 12-bit Conversion rate : 10KS/s max. Input impedance : 10 M Ohm Overvoltage protection : +/-35V Accuracy : 0.01% of reading +/- 1-bit Linearity : +/- 1-bit On chip sample & hold Zero drift : +/-25ppm/oC of FS max. Power Requirements: +5V @850mA max. Environmental Operating temp 0-50?C Storage temp -20 to 70?C Humility 0 to 90% non-condensing Dimensions 180 mm x 105 mm