Caractéristiques détaillées:

3U CompactPCI CPU Module W/ Pentium III 850MHz CPU, 128MB RAM, CRT/LCD, Ethernet and 20GB(minimum) HDD

CPU:
Socket370 FC-PGA supports Intel Celeron up to 733MHz or Pentium III up to 850MHz
FSB:
66/100MHz
Cache:
Subject to CPU
Chipset:
Intel 440BX AGPset, Intel 82443BX and 82371EB(PIIX4E)
BIOS:
Award BIOS
Memory:
One 144-pin SO-DIMM socket supports up to 256MB un-buffered SDRAM, ECC supported
IDE Interface:
Two 44-pin bus master EIDE interfaces support up to four IDE devices; HDD, ATAPI CD-ROM, LS120, ZIP and Flash Disk Drives; PIO mode 3/4 or Ultra DMA/33 IDE devices supported
USB Ports:
Two USB ports on the front panel, USB Specification Rev. 1.1 compliant and individual over-current protection supported
Parallel Port:
One Bi-directional parallel port, SPP/EPP/ECP modes supported
FDD Interface:
One FDD interface supports up to two floppy disk drives, 360KB/720KB/1.2MB/1.44MB/2.88MB supported
Serial Ports:
Two 16C550 UARTs, one RS-232 on the front panel as COM and one selectable RS-232/422/485 on rear I/O transition module as COM2
Supper I/O:
Winbond W83977EF
Watchdog Timer:
Programmable I/O port 2Eh and 2Fh, 1~255 sec./min. timer
Hardware Monitoring:
Winbond W83782D monitors system temperatures/fan speeds/voltages
Display:
-SMI Lynx3DM SM721 AGP 2x VGA/LCD controller with 4MB display VRAM
-Dual-display and simultaneous display supported for both CRT and LCD output, RAMDAC Latch-up protection supported
-High performance, power managed 3D acceleration engine
-High performance, 128-bit, single clock cycle 2D drawing engine
-AGP 2x, ACPI, VESA DPMS and VESA DDC 2b compliant
-Supports up to 1280x1024 VGA display resolution with 24-bit true color, non-interlaced
-Supports up to 1600x1200 VGA display resolution with 256 color, non-interlaced under WindowsNT
-One VGA display connector on the front panel and one 24-bit RGB-TFT LCD connector on rear I/O transition module
LAN:
Intel 82559 LAN controller, 10BaseT/100BaseTX Ethernet
PCI Bus Bridge:
TI PCI2050 transparent PCI to PCI bridge, supports up to 7 PCI bus master devices on CompactPCI bus for peripheral slots
Flash Disk Supporting:
IDE interface flash disksupports up to 2GB and one DiskOnChip socket supports up to 288MB
Mechanical:
3U, 12HP width with optional slim type FDD (8HP width without FDD module) PICMG CompactPCI 2.0 rev. 2.1 compliant
Front Panel LEDs and Switch:
LEDs for Power status/Ethernet/IDE activity; Flush tact switch for system reset
Form Factor:
3U CompactPCI, 8 or 12 HP wide
Operating Temperature:
0 to 60 C (32 to 140 F)
Storage Temperature:
-20 to 70 C
Certification and Test:
CE, FCC; HALT (temperature and vibration stress)